Vyrsa 60 sector sprayer
VYRSA sector sprayer type 60.
Brass sector sprayer with ¾ "male or female thread, spray nozzle 4.4 x 2.4 mm Suitable for medium-sized surfaces.
The wide range of brass or plastic nozzles offer a number of possible combinations. This sprinkler is designed to work under a flow range between 2,7 and 15 ,2 GPM , at pressures between 25 and 65 PSI and cover a range of between 42 and 60 ft. in diameter. The sprinkler VYR-60 can work with one or two nozzles; The main nozzle has 24 degrees of inclination from the horizontal plane and the secondary 12. Their average time of rotation comes to be approximately 30 sec./rot. (45 PSI 11/64"x3/32" / 3 BAR, 4.40 x2,40 mm).
For optimum uniformity coefficient, our technicians recommend the use of the sprinkler heads with a spacing between lines and 50x50 meters to 50x60 meters rectangular frames and 50x50 feet to 60x60 feet to triangular frames.
Reach: 42-60 ft. (13-18 m).
Flow: 2,7-15,1 GPM (660- 3270 l/h).
Working pressure: 25-65 PSI (1,75- 4,5 BAR).
Area: Part or full circle.
Nozzles: One main long reach nozzle and a secondary short reach nozzle.
Trajectory angles: 24º and 12º.
Maximum stream height: 12 ft. (3,8 m).
Rotation time: Depending on the pressure and the nozzles, the rotation will be constant and continuous.
Uniformity coefficient higher than 90% in areas of 60x60R, 50x60T, 60x60T ft.